Polyurethane sandwich board-FAQ and Solution 1. Black line of board foam The black line of foam under the normal use is caused by the mixing pressure of the equipment. With the increase of working hours, the fluctuation of the mixing pressure o

2018-04-26

View details

Polyurethane spraying-FAQ and Solution 1. The material flows on the wall: Cause: slow material speed, or poor material atomization, uneven spraying. Solution: Adjust the equipment, improve heating temperature of pipeline, and improve hea

2018-04-26

View details

Polyurethane thermal insulation pipe -FAQ and Solution 1. De-housing of foam at the pipe head The main cause for de-housing of foam is uneven ratio between black material and white material, which results in the separation of the foam from the steel pipe

2018-04-26

View details

The difference between “special rigid-foam/CASE polyether” and “rigid-foam/CASE polyether” Hello! INOV “special” series polyether polyol products are developed by R&D engineers of polyether according to rich experience in product application, up-to-date market condition and customer demands

2018-04-26

View details

Home appliance refrigerator freezer – FAQ and Solution 1. Layering between liner or housing and foam Answer: possible causes include: 1. Too low mould temperature; 2. Too short demoulding time; 3. Surface of liner or side plate is polluted; 4. Poor adhes

2018-04-26

View details

Polyurethane Solar - FAQ and Solution 1. Solar - FAQ and Solution ① Uneven color of pipe orifice Uneven mixture of black material and white material Solution: Adjust material temperature and mixing pressure. ② Cracking of pipe orifice

2018-04-26

View details